Container replacement for Truma therm TT + TT2 with container shell.
- 1 container shell
- 1 seal for the heating element
- 2 rubber seals for the heating element pipe
- 2 drain valve
Delivered without the heating element and the pipe, which is around the heating element.
Please exchange the remaining drain valves with the new ones. In some cases, you have to increase the hole size a bit.
The new valves are a bit wider, so the discharge is much easier than before.
There need to be 2 valves, so the water drains off completely - otherwise there might be a frost damage if some water remains in the container.
Please check, if the water-taps are opened, so the system can draw some air. Otherwise the therm won't discharge completely.
Note: This spare part does not come with an installation guide, because it is usually sent to repair shops.
The installation needs to be executed by a technical experienced person.
- Original spare parts are supplied without installation instructions and mounting materials, as these parts are intended for an installation in a workshop.
Please be aware that the following informations: Used from ..... to, do not always apply for all vehicles of a specific model year.
If you can’t identify an article based on the pictures, then please send a request, with your chassis number (vehicle identification no.) enclosed, to the sparepart support .
- If you want to order the following articles, please always submit your chassis number (vehicle identification no.) during the order process.
Windows, bumpers, brake pads, rims, shock dampers, voltage transformers, lighting control systems, cutlery drawers, carpets.
No shipping without the vehicle identification no. ! ! !