Mushroom vent / chimney for the extractor hood for Hobby caravans, but was also used by many other producers
Interior diameter of the inner part: 90 mm
Exterior diameter of the inner part: 128 mm
Roof cutout measurements / aperture round: 110 mm
For other dimensions please look at the pictures.
Please note that mushroom vents like all other mounting parts should not be installed with silicone on the vehicle.
Don't forget the sealants!
Please don't use silcone.
Silicone has the disadventage to come off the vent after a short time and water can get into your vehicle.
Generally, you should only use permanent elastic sealants like Dekaseal to keep your caravan sealed for a long time. You will find these sealants underneath this article.
- Original spare parts are supplied without installation instructions and mounting materials, as these parts are intended for an installation in a workshop.
Please be aware that the following informations: Used from ..... to, do not always apply for all vehicles of a specific model year.
If you can’t identify an article based on the pictures, then please send a request, with your chassis number (vehicle identification no.) enclosed, to the sparepart support .
- If you want to order the following articles, please always submit your chassis number (vehicle identification no.) during the order process.
Windows, bumpers, brake pads, rims, shock dampers, voltage transformers, lighting control systems, cutlery drawers, carpets.
No shipping without the vehicle identification no. ! ! !